carb

A place within the MRA for scooter enthusiasts to exchange information.

Moderators: ItsLookingUp, pehuskey, Tab, mountainmoped, JD, John

carb

Postby dragonfly » Thu Nov 17, 2011 12:45 pm

anyone know if this carb will fit my sons dragonfly moped/scooter?
says it will fit all chinese bikes,
http://www.ebay.co.uk/itm/NEW-50CC-CARB ... 1128wt_754
dragonfly
Net Rider
 
Posts: 16
Joined: Mon Nov 14, 2011 1:40 pm
Location: WILTSHIRE UK.

re: carb

Postby John » Thu Nov 17, 2011 6:37 pm

I would phone or e-mail JKBikes over there (UK) and ask the question. E-mail addy is on the bottom of the ad. You need to know how the carb is mounted on your scooter, whether by bolts (spacing between studs) to the cylinder or by a rubber boot intake sleeve. Also if bolted whether you need a flat gasket or a copper ring gasket.
John

"Plan your life like you will live forever, and live your life like you will die the next day!"
User avatar
John
Master Regional Rider
 
Posts: 4444
Joined: Tue Nov 18, 2003 9:52 pm
Location: Caledonia, Ontario, Canada

re: carb

Postby dragonfly » Sun Nov 20, 2011 3:17 pm

good stuff thanks for the tip,

just emailed them watch this space,lol
dragonfly
Net Rider
 
Posts: 16
Joined: Mon Nov 14, 2011 1:40 pm
Location: WILTSHIRE UK.

re: carb

Postby dragonfly » Thu Dec 08, 2011 12:58 pm

yup was advised it would fit,so brought it runs nice now but lack of poke,
see other tread, no poke.
dragonfly
Net Rider
 
Posts: 16
Joined: Mon Nov 14, 2011 1:40 pm
Location: WILTSHIRE UK.


Return to Scooter Riders

Who is online

Users browsing this forum: No registered users and 3 guests