Sears Free Spirit Moped

General discussion forum for repairing and riding mopeds

Moderators: ItsLookingUp, pehuskey, Tab, mountainmoped, JD, John

Sears Free Spirit Moped

Postby charles42d » Tue Jul 17, 2012 4:59 pm

I tried to find a 6 volt bulb for the taillight but I had to get a 7 volt bulb. Would that make a difference in moped not running properly? Charles Goman
Charles Goman
charles42d
Net Rider
 
Posts: 3
Joined: Wed Oct 03, 2007 10:18 am
Location: small town georgia

re: Sears Free Spirit Moped

Postby greenhead » Tue Jul 17, 2012 5:19 pm

It should run without a bulb at all. I noticed your last post mentioned no spark, I'd un-wire everything and only wire the ignition bypassing the on/off switch, horn, lights, etc. You'll want to have your stator cover off to drag it down with your shoe or cover the carb to choke it out, since the switch won't work. Of course I'd just get a CDI or at least a 12v lighting coil, because 6v lights don't cut it. Here's the wiring diagram I use, I keep a color copy taped inside the lid of my tool box. http://www.mopedarmy.com/forums/read.ph ... 63,3062229
greenhead
Net Rider
 
Posts: 12
Joined: Wed Jun 20, 2012 8:46 pm
Location: United States

re: Sears Free Spirit Moped

Postby charles42d » Wed Jul 18, 2012 2:17 pm

Thanks for the diagram and the information. I will give it a try. Thanks Charles Goman
Charles Goman
charles42d
Net Rider
 
Posts: 3
Joined: Wed Oct 03, 2007 10:18 am
Location: small town georgia

re: Sears Free Spirit Moped

Postby jimbodaddy74 » Tue Oct 16, 2012 1:41 pm

Did you ever get this to work?
jimbodaddy74
Net Rider
 
Posts: 8
Joined: Thu Jun 18, 2009 8:17 pm
Location: Corvallis, Oregon


Return to Moped Riders

Who is online

Users browsing this forum: No registered users and 18 guests