Help with Wiring Points and Condesor?

General discussion forum for repairing and riding mopeds

Moderators: ItsLookingUp, pehuskey, Tab, mountainmoped, JD, John

Help with Wiring Points and Condesor?

Postby resin113 » Mon Jul 23, 2012 8:49 pm

Condenser wiring.

I have a Tomos that wasn’t running when I purchased it andtrying to figure it out. It appears that someone was working on it in the past.

I need help determining how the condenser is suppose to bewired up on a 1994 Targa LX…

The condenser has three wires going to it.

Black Wire> Goes to the Points

Black Wire> Goes to the coil

Green Wire> That goes to the Magneto.


My question is when I use the ohm meter on the black wire(going to the coil) and ground. I get Ohms constantly, even when the pointsopen and close. I made sure the points are opening. The only way I can get it to work is to remove the green wire.. Should the green wire connect to thecondenser?

I am trying to set the timing as the manual states.

I appreciate all the help.
resin113
Net Rider
 
Posts: 1
Joined: Thu Jul 19, 2012 8:33 pm
Location: Ohio

Return to Moped Riders

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 6 guests