Need help with Tomos A3N

General discussion forum for repairing and riding mopeds

Moderators: ItsLookingUp, pehuskey, Tab, mountainmoped, JD, John

Need help with Tomos A3N

Postby cfg500 » Thu Nov 22, 2012 3:40 pm

I just bought a 1994 Tomos A3N Sprint. No wires or cable are connected, and some are not even there. I have some stuff coming, but I could use
1. a free online manual,
2. pictures of both sides of engine,
3. help with things every now and then (for example: The tubes that go to the flywheel are for the injection of oil right? If I want to premix, how can I plug the tube going to the carb.?)

I could also use several items such as:
1. engine covers (both sides),
2. used spedometer,
3. used rear tire
I can pay by paypal.
Thanks for your help,
C
cfg500
Net Rider
 
Posts: 13
Joined: Wed Oct 17, 2012 7:46 am
Location: Jackson, MI

re: Need help with Tomos A3N

Postby John » Thu Nov 22, 2012 5:13 pm

A3 manual in the repair section. Moped Army and shout out in the buy and sell for covers. They are metal and have a clip for a air pump on the inside of one. At manifold cut a bolt short and plug the oil injection bolt entry hole. Pull lines and disconnect the pump at the flywheel on the left side. Simple as removing the inner coupling and reinstall pump. Loop lines at pump to keep crap out. Pull tank out and use space for small items. Mix fuel at 40:1.
John

"Plan your life like you will live forever, and live your life like you will die the next day!"
User avatar
John
Master Regional Rider
 
Posts: 4444
Joined: Tue Nov 18, 2003 9:52 pm
Location: Caledonia, Ontario, Canada

re: Need help with Tomos A3N

Postby cfg500 » Thu Nov 22, 2012 5:35 pm

Thanks John.
Now to get started.
cfg500
Net Rider
 
Posts: 13
Joined: Wed Oct 17, 2012 7:46 am
Location: Jackson, MI


Return to Moped Riders

Who is online

Users browsing this forum: Google [Bot] and 1 guest