FUBAR build and restomod

General discussion forum for repairing and riding mopeds

Moderators: ItsLookingUp, pehuskey, Tab, mountainmoped, JD, John

FUBAR build and restomod

Postby Flat_Track_Racer » Wed Nov 27, 2013 7:35 pm

I've decided to start a build thread of my tomos. It needs alot of repairs just to fix all the damage the PO did to it.
Flat_Track_Racer
Net Rider
 
Posts: 37
Joined: Fri Sep 13, 2013 2:14 pm
Location: Ontario

re: FUBAR build and restomod

Postby Flat_Track_Racer » Thu Nov 28, 2013 12:32 am

Plastic welded the front fairing with my soldering iron need to fix my torch lighter to fix up the back side of the repair where I used model car sprue as filler rod.going tomake my own friction welder to weld on some plastic washers where the side panel screws broke through. Planning on a Spiderman type paintjob with the original black paint
Flat_Track_Racer
Net Rider
 
Posts: 37
Joined: Fri Sep 13, 2013 2:14 pm
Location: Ontario

re: FUBAR build and restomod

Postby JD » Sun Dec 01, 2013 12:07 pm

Pics would make this more interesting.
...Operating with impunity in the legal gray area between bicycles and motorcycles....
User avatar
JD
Master Regional Rider
 
Posts: 1696
Joined: Wed Dec 03, 2003 5:42 pm
Location: Huntington Woods, Michigan

re: FUBAR build and restomod

Postby Flat_Track_Racer » Sun Jan 05, 2014 3:39 pm

Pics are forthcoming once I figure out how to post them properly from my phone
Flat_Track_Racer
Net Rider
 
Posts: 37
Joined: Fri Sep 13, 2013 2:14 pm
Location: Ontario

re: FUBAR build and restomod

Postby Flat_Track_Racer » Thu Jan 09, 2014 8:41 pm

Recent projects finished
You do not have the required permissions to view the files attached to this post.
Flat_Track_Racer
Net Rider
 
Posts: 37
Joined: Fri Sep 13, 2013 2:14 pm
Location: Ontario

re: FUBAR build and restomod

Postby RebelRider.Mike » Thu Jan 09, 2014 10:07 pm

Looking good!
Mike

1979 Puch Free Spirit
1987 Honda Rebel
2014 Ural M70
User avatar
RebelRider.Mike
Net Rider
 
Posts: 140
Joined: Sat Aug 03, 2013 3:04 pm
Location: Shelton, WA

re: FUBAR build and restomod

Postby Flat_Track_Racer » Sat Jan 11, 2014 6:26 pm

Keep in mind this is being built in my one bedroom walkup 2nd floor apartment. One other project I have in mind is adapting the streetmate r headlights and fairing onto this build. I've tested out the riding position and I really like it alot more than being so upright with the stock bars.
Flat_Track_Racer
Net Rider
 
Posts: 37
Joined: Fri Sep 13, 2013 2:14 pm
Location: Ontario


Return to Moped Riders

Who is online

Users browsing this forum: Bing [Bot] and 6 guests