Post your jetting info here!

General discussion forum for repairing and riding mopeds

Moderators: ItsLookingUp, pehuskey, Tab, mountainmoped, JD, John

re: Post your jetting info here!

Postby Slocketman » Thu Nov 29, 2007 8:09 pm

1982 Murray (Puch E50)
14mm Bing (was stock, took out restriction that had it at 9mm)
Uni Foam Filter
Tecno Estoril
#68 main jet, "one ring" jet needle
Slocketman
Net Rider
 
Posts: 3
Joined: Sat Nov 17, 2007 2:18 pm
Location: Columbus, OH

re: Post your jetting info here!

Postby Targa5150 » Wed Feb 20, 2008 11:18 am

As far as my bike:

2005 Tomos Targa LX (Yellow)
A-35 engine (with a little porting done to the exhaust & a modified reed valve)
Biturbo exhaust (with reinforced can)
Ghetto filter on carb (using a stocking - thanks Angie)
27th front sprocket (a.k.a. speed sprocket)
Stock rear sprocket
#66 jet (running just a tad rich)
17,662 Miles on bike at present time
Top Speed 45 mph

Other mods were done but not for preformance.. :)

Alan
50cc Of total Insanity -
HELP.. Im lost in Hillbilly hell!!!
My Ride - Yellow '05 Targa LX (45mph)
Targa5150
Distinguished Rider
 
Posts: 343
Joined: Thu Nov 27, 2003 7:35 pm
Location: Tallahassee, FL

re: Post your jetting info here!

Postby *Mabecane* » Sat Mar 22, 2008 7:01 pm

Motobecane with the 15/15 Sha dellorto on a stock engine use the 59 jet, you will be able to run the engine and keep the plastic cover from the dellorto, To use a bigger jet you may need a performance air filter. This application is for the factory stock engine.
ps: this jetting is for near sea level.
*Mabecane*
 

re: Post your jetting info here!

Postby John Bruce McCreath » Sun Mar 30, 2008 8:25 am

2005 Tomos Bullet A35
Factory stock engine
Airbox snorkel restriction removed
No. 56 jet
Tecnigas Next exhaust
60 k/h WOT on level road

Cheers, J.B.
John Bruce McCreath
Net Rider
 
Posts: 23
Joined: Sun Aug 12, 2007 9:17 am
Location: Saltford, Ontario, Canada

re: Post your jetting info here!

Postby dieselmech » Thu Apr 03, 2008 2:42 pm

1998 Sprint A-35
Airsal kit, Biturbo pipe, 15mm carb, 68 jet.
11 dollar air filter. K&N type, .015 cut head
very slight porting. geared 28 / 20
Mobil one two stroke oil only. forever.
46 MPH according to GPS

2007 front fork set up to handle faster speeds.
FUN ! !

Ben
dieselmech
Net Rider
 
Posts: 10
Joined: Mon Nov 05, 2007 10:20 pm
Location: Riverside California

re: Post your jetting info here!

Postby tyratliff » Sat May 10, 2008 3:00 pm

1979 Vespa Grande
64cc DR cylinder
Malossi Air Box
13/13 carb
Techno Estril Exhaust
#66 Jet
Altitude = 5500 Ft


1974 Vespa Ciao
64cc Polini Cylinder
Black filter Malossi clone air filter
Techno circuit exhaust
#66 Jet
Altitude = 5500 Ft

Climate is super dry all of the time
tyratliff
Net Rider
 
Posts: 2
Joined: Tue Apr 22, 2008 11:34 pm
Location: Albuquerque NM

re: Post your jetting info here!

Postby DirtyDan » Thu May 22, 2008 5:33 pm

1978 Puch Maxi (E50)
70cc kit, 17mm amal carb, #45 jet
biturbo exhaust
custumized airfilter out of oil breather.
borded out exhaust and intake ports
top speed 43mph (radar gun)
stock sprockets
Lifes a Garden, Dig it
DirtyDan
Net Rider
 
Posts: 58
Joined: Fri Oct 19, 2007 7:41 pm
Location: Minnesota

re: Post your jetting info here!

Postby ironXcross » Wed May 28, 2008 1:02 am

tomos targa with a35 stock except

-bullet exhaust
-airbox tube cut off

using a 56 jet not too far from the sea.
ironXcross
Net Rider
 
Posts: 20
Joined: Thu May 15, 2008 7:28 pm
Location: sudbury, MA

re: Post your jetting info here!

Postby evgdboy » Sat Jun 07, 2008 5:54 pm

2002 tomos targa st. a35
stock airbox and carb.
oil injection removed
tecno estoril
#60 jet
altitude - 799 ft.
evgdboy
Net Rider
 
Posts: 17
Joined: Tue Oct 09, 2007 8:55 am
Location: w.mass

re: Post your jetting info here!

Postby ironXcross » Sun Jun 08, 2008 7:22 pm

update:

-'96 targa with a35
-snorkel cut off from airbox, about 8 holes drilled in it, and restrictive fin things inside removed
-tomos bullet exhaust
-stock dellorto carb
-airsal 70cc kit
-nearish to sea level

jet: 66

at first with the 66 it fourstroked so I went back to 64, but figured hey why not just drill up the airbox and see if I can go back to 66 and that worked out pretty well.
ironXcross
Net Rider
 
Posts: 20
Joined: Thu May 15, 2008 7:28 pm
Location: sudbury, MA

re: Post your jetting info here!

Postby frenchy » Thu Jun 12, 2008 9:54 pm

2006 Tomos Revival TS

1. Rear sprocket 28 tooth.
2. Biturbo pipe
3. Gutted air box (long story)
4. Jetted to #68

Speed has increased from 28mph to about 37 mph!
frenchy
Net Rider
 
Posts: 228
Joined: Mon Aug 27, 2007 1:25 am
Location: Philly Burbs

re: Post your jetting info here!

Postby tomos_ATX50 » Fri Jun 27, 2008 5:22 pm

TOMOS ATX 50 with new 49cc 7,5horse power cilinder from TOMOS-50 JUNIOR ,23mm BING carb.,A5 cilinder head,new chromed MOTINS 38mm piston...planing to put sport muffler KANTOR...
ATX50C made in Yugoslavia
Bubba Zanetti....ultimate bad guy
Image
tomos_ATX50
Net Rider
 
Posts: 422
Joined: Fri Jun 27, 2008 2:12 am
Location: Zajecar,Serbia

re: Post your jetting info here!

Postby tomos_ATX50 » Tue Jul 08, 2008 7:53 am

here is an old cross muffler,that i putted back...


http://s222.photobucket.com/albums/dd75 ... 3_0001.flv
ATX50C made in Yugoslavia
Bubba Zanetti....ultimate bad guy
Image
tomos_ATX50
Net Rider
 
Posts: 422
Joined: Fri Jun 27, 2008 2:12 am
Location: Zajecar,Serbia

re: Post your jetting info here!

Postby tomos_ATX50 » Fri Jul 18, 2008 6:49 am

update for my ATX...

new 12V80W electronic ignition,now,name is updated to

TOMOS ATX-50C/E

E*-Electronic
ATX50C made in Yugoslavia
Bubba Zanetti....ultimate bad guy
Image
tomos_ATX50
Net Rider
 
Posts: 422
Joined: Fri Jun 27, 2008 2:12 am
Location: Zajecar,Serbia

PreviousNext

Return to Moped Riders

Who is online

Users browsing this forum: Bing [Bot] and 4 guests