Post your jetting info here!

[Slocketman]

1982 Murray (Puch E50)
14mm Bing (was stock, took out restriction that had it at 9mm)
Uni Foam Filter
Tecno Estoril
#68 main jet, "one ring" jet needle

[Targa5150]

As far as my bike:

2005 Tomos Targa LX (Yellow)
A-35 engine (with a little porting done to the exhaust & a modified reed valve)
Biturbo exhaust (with reinforced can)
Ghetto filter on carb (using a stocking - thanks Angie)
27th front sprocket (a.k.a. speed sprocket)
Stock rear sprocket
#66 jet (running just a tad rich)
17,662 Miles on bike at present time
Top Speed 45 mph

Other mods were done but not for preformance.. :)

Alan

[*Mabecane*]

Motobecane with the 15/15 Sha dellorto on a stock engine use the 59 jet, you will be able to run the engine and keep the plastic cover from the dellorto, To use a bigger jet you may need a performance air filter. This application is for the factory stock engine.
ps: this jetting is for near sea level.

[John Bruce McCreath]

2005 Tomos Bullet A35
Factory stock engine
Airbox snorkel restriction removed
No. 56 jet
Tecnigas Next exhaust
60 k/h WOT on level road

Cheers, J.B.

[dieselmech]

1998 Sprint A-35
Airsal kit, Biturbo pipe, 15mm carb, 68 jet.
11 dollar air filter. K&N type, .015 cut head
very slight porting. geared 28 / 20
Mobil one two stroke oil only. forever.
46 MPH according to GPS

2007 front fork set up to handle faster speeds.
FUN ! !

Ben

[tyratliff]

[DirtyDan]

1978 Puch Maxi (E50)
70cc kit, 17mm amal carb, #45 jet
biturbo exhaust
custumized airfilter out of oil breather.
borded out exhaust and intake ports
top speed 43mph (radar gun)
stock sprockets

[ironXcross]

[evgdboy]

[ironXcross]

update:

-'96 targa with a35
-snorkel cut off from airbox, about 8 holes drilled in it, and restrictive fin things inside removed
-tomos bullet exhaust
-stock dellorto carb
-airsal 70cc kit
-nearish to sea level

jet: 66

at first with the 66 it fourstroked so I went back to 64, but figured hey why not just drill up the airbox and see if I can go back to 66 and that worked out pretty well.

[frenchy]

[tomos_ATX50]

[tomos_ATX50]

here is an old cross muffler,that i putted back...


http://s222.photobucket.com/albums/dd75 ... 3_0001.flv

[tomos_ATX50]